Cortex Switches

Annexxus Cortex Switch SW-26210

Key Features

• 10/100BaseTX with RJ-45 Connectors: 24 port with PoE
• 10/100/1000BaseT with RJ-45 Connectors: 2
• Power over Ethernet, 802.3af/802.3at complient
• PoE Management, Plug and Play connectivity
• Link Aggregation groups
• Supports VLAN
• Supports Link Aggregation

Description

The SW-26210 is 24-port 10/100M with PoE + 2 Combo Gigabit Copper / 2 SFP Rack-mount Gigabit Ethernet Switch that is designed for medium or large network environment. The SW-26210 features IEEE 802.3af Power over Ethernet (PoE) ports supplying a maximum of 390 watts, converting standard 100~240V/AC power into low-voltage DC to power network devices. PoE awareness means transmitting power only when compliancy of devices is verified, or else only the data will be sent through LAN cable. By adding SW-26210 to existing networking, installing networking products such as Access Points and IP cameras is simple. Wireless device deployments are easily located within range of available power outlets and negating the use of heavy AC power adapters.

Exceptionally Smart
SW-26210 provides Smart features ideal for simple QoS/CoS applications and basic monitoring tools to improve network efficiency. Through a Web-based interface, an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data and link aggregation to create fat traffic pipelines.

Automatic traffic management
Every port is equipped to automatically sense if the connected network devices are running at 10Mbps or 100Mbps and Half/Full-Duplex mode or if a device is MDI or MDI-X making crossover cables uneccessary for any installation. A store and forward function minimizes the propogation of bad network packets. Traffic is forwarded seamlessly with its non-blocking wire speed, simulataneously supporting up to 200 or 2000Mbps of bandwidth in full-duplex mode.
  Annexxus Cortex Switch SW-26210
Hardware Specification
Copper Ports Number of Ports:
10/100BaseTX with RJ-45 Connectors: 24 port with PoE
10/100/1000BaseT with RJ-45 Connectors: 2
LED Per Port: Link/Act, PoE : Act / Status, Per Unit: Power
Dimension (W x D x H) 44 × 440 × 330 mm (H x W x D)
Power Consumption 390 Watts (Max)
Power Requirement 100~240 V/AC, 50~60Hz
Power over Ethernet
PoE Standard IEEE802.3af Power over Ethernet
PoE Power Output 48V /DC Per Port Output
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 390W
Layer 2 function
Basic Management Interfaces Web-Based Management, Graphical User Interface
Secure Management Interfaces Password-protected Access
Port configuration "On/off PoE port settings
Auto-negotiation
Bandwith Control
Broadcast Storm Control
Port Mirroring"
VLAN "IEEE 802.1Q VLAN protocol
Tag Based: 32
Port Based: 26
VLAN ID ( Up to 4094 K )"
Link Aggregation Trunk ( up to 4 Ports per Group, 2 Groups per Device )
QoS "802.1p QoS/Class of Service
Priority Protocols
2 Queues
Priorities: Port-based/TOS/Diffserv/DSCP/IP/IPv4/IPv6"
IGMP Snooping IGMP Snooping available
Standards Conformance
Regulation Compliance "FCC Class A, CE
"
Standards Compliance IEEE 802.3 at
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Full-duplex and Flow Control
IEEE 802.1Q VLAN
IEEE 802.1p QoS / Class of Service, Priority Protocols
IEEE802.3 Nway Auto-negotiation
IEEE802.3af Power over Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 801.1W Rapid Spanning Tree Protocol
Environment
Operating 0 to 45°C
10 to 90% RH (non-condensing)
Storage -20 to 90°C
10 to 90% RH (non-condensing)